Shoes are expensive accessories and watching your favorite pair showing signs of tear and wear is very frustrating, especially when it comes to the shoe sole. Worn or split sole means wet feet during winter or even worse, such shoes can make your trip and that can cause a severe accident. Well, are you now wondering how to fix shoe sole separation? You don’t have to throw your footwear away because of the separate sole.
Here is how you can fix the problem-
Clean the area you need to repair
As you plan to fix your shoes, it is good first to clean the area that you wish to repair. You can choose to use water or rubbing alcohol on a piece of cloth. To do so, remove the shoe’s insoles and stuff papers in the shoe. By doing so, you are giving the shoes some rigidity that it needs during the process of clamping.
Bottom-line
Stuffing the inner part of the shoe with papers, you will help by allowing the papers to absorb the glue that might leak into the shoe during the process newspapers are the best to use, and the toe area needs to be firm after the stuffing.
The glue
Invest in good shoe glue for the best results. Make sure that you get thick and sticky glue. Also, wear disposable gloves to make sure the glue does not come into contact with your hands. Also, make sure you lay newspaper or an old towel on your working area to catch any drips.
Bottom-line
Before you open the glue, always read the instructions as well as the warning label to make sure you use it as per the manufacturer’s instructions.
Applying glue to the shoe
To effectively apply the glue into the shoe sole, squeeze the glue directly over the sole and some on the edges on the shoe bottom, after that, scrub the glue around with a cotton mop.
Bottom-line
Never glue the toe ca area for the best results.
Clamping your shoe
Leave the glue to settle for about two minutes before you can clamp the surfaces. Once the two minutes are over, apply weight on the shoes to hold the upper and the soles together. You may choose to use brick pavers as your weights. All you need to do is to place the heel of the sneaker on a wood block so that the shoe remains clamped together.
Bottom-line
The clamping process is usually done in two steps; you glue the upper to the sole and then clamp the toe cap area after. Leave the glue to dry for like 24 hours.
Gluing the toe cap
Once the sole glue is dry, it is now time to glue the toe cap area. Lift the toe cap and glue the area and then clamp the shoe with a piece of wood. You can do that by pressing the shoe in the middle of two pieces of wood.
Bottom-line
By clamping the toe area between two pieces of wood, you are making the process easy and effective. After one day, remove your shoes from the clamping device.
The repair is complete
Once you are done fixing the separate soles, it is now time to remove the papers from the shoes. As you re-attach the sole with the upper, the shoe might lose its shape, but with the paper stuff, your shoes get back in shape.
Bottom-line
You now have a complete shoe! Once you remove the papers, do other shoe preparation processes like cleaning and brushing the shoe ready to wear them.
Why throw away your favorite pair of shoes simply because the sole came off? With the above tips on how to fix separate shoe soles, you will get your shoes looking as good as new.
Leave a Reply